« previous next »
Pages: [1]   Go Down

Author Topic: duplex copy jam dc250  (Read 406 times)

eureka

  • Member
  • **
  • Posts: 10
    • View Profile
duplex copy jam dc250
« on: October 04, 2008, 02:11:00 PM »
If we take duplex copy, full black tint the first one, the second side jams while entering the fuser. pls guide to solve.
Logged

Copiers_Plus_WWLLC

  • Member
  • **
  • Posts: 7
    • View Profile
Re: duplex copy jam dc250
« Reply #1 on: November 12, 2009, 11:34:12 PM »
Make sure the Corona Wires are not broken ,check the Transfer Static is building on paper, I believe that is why it is jamming. :-)
Logged

Milo Wilson

  • Senior Member
  • ****
  • Posts: 272
    • View Profile
Re: duplex copy jam dc250
« Reply #2 on: November 13, 2009, 12:03:29 AM »
Is there enough lead edge erase on the printed side? If not, that could cause a jam.
Logged

photocopyrepairman

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: duplex copy jam dc250
« Reply #3 on: February 07, 2010, 08:36:09 PM »
THERE ARE NO " CORONA WIRES " IN THE DC 250 SO YOU CAN STOP LOOKING FOR THEM !
static is rare on these units,
confirm that you are setting the paper tray to the correct stock that is loaded in the tray- 85% of the time customers are loading a heavyweight paper in the trays or bypass tray and leaving the machine set at plain bond paper ! if the stock is too heavy to duplex people try to tell it a lighter weight stock to try and get it threw the machine this will not work !
the best way is to use the bypass tray for both sides on heaviest of your stocks
if it is not duplexing regular paper i suspect some slippage buring the inversion of the paper so the cleaning of any rollers in side the right hand door or ultimateley replacement of the rollers !
hope this helps ! these are a dream unit to work on and copy quality is superb !  one of the best machines i have seen in my 30 years !
Logged
Pages: [1]   Go Up
« previous next »