Please login or register.

Docutech Community

News:
« previous next »
Pages: [1]   Go Down

Author Topic: Dead WCP90  (Read 181 times)

Tribalben

  • Member
  • **
  • Posts: 5
    • View Profile
Dead WCP90
« on: February 13, 2010, 02:02:57 AM »
I have a dead WCP90, which is getting power into the LVPS, but I have not been able to test whether it is getting the right voltage out of it. The machine does nothing when the power is turned on, but I have power coming out of the distribution assembly. Any advice on where to go from here would be helpful. I have a feeling that the LVPS might be bad, or the AC dist, but I am not sure which pins to check.
Logged

Tribalben

  • Member
  • **
  • Posts: 5
    • View Profile
Re: Dead WCP90
« Reply #1 on: February 13, 2010, 02:45:25 AM »
Ok, so I checked J/P41 , it seems to be giving out the right voltages from ground to pin 1 and pin 3 ( 120) and then 240 from 1 to 3.

Where do I go from here?
Logged

xeroxpws

  • Senior Member
  • ****
  • Posts: 175
    • View Profile
Re: Dead WCP90
« Reply #2 on: February 13, 2010, 01:59:15 PM »
About 90 percent of the time its the LVPS, take the cage off and look real close at the power transisters . If they look toasted , replace the LVPS .
Logged
" If there's a new way
  I'll be first in line
  But it better work this time"

Tribalben

  • Member
  • **
  • Posts: 5
    • View Profile
Re: Dead WCP90
« Reply #3 on: February 13, 2010, 10:45:38 PM »
Any suggestions on where to find a new one? I keep running into no longer stocked, etc.
Logged

midtek

  • Member
  • **
  • Posts: 30
    • View Profile
Re: Dead WCP90
« Reply #4 on: February 16, 2010, 08:42:23 AM »
I have a half dozen machines for parts, let me know if you need one

midtek
Logged
Pages: [1]   Go Up
« previous next »