DpsTeck

Recent Posts

Pages: [1] 2 3 4 5 6 7 8 ... 10
1
THE CSE COFFEE HOUSE / A discussion question about the copy/print industry
« Last post by exCSER on May 18, 2018, 09:57:42 AM »
Hi guys,

I'd like to start a dialog about the state of the industry that we as service providers support. There has been a steady decline in the amount of places that utilize high volume machines over the years. The internet has had an impact on all of us,both good and bad. There is a lot less paper being used these days-we are  becoming a 'paperless society'. I've been servicing machines for almost 40 years (mostly high volume b&w but also low and mid volume b&w and color machines from all manufacturers) and have heard that term since I started, but it's getting closer. I work in southern California, but I'd like to hear what is going on in other parts of the world that relates to us and what we do.

Please share your thoughts and experiences.

Don
2
DOCUCOLOR / Docucolor 5000 fuser parts
« Last post by RumTum on May 17, 2018, 09:37:51 AM »
Interested in used heat rolls and fuser pressure belt for Docucolor 5000.
Contact mickey@tvpinc.com
Thanks
3
Hi Laserguy

Did you find the  Nuvera X86  54.75.05.86
 for xerox nuvera digital copier/printer 120
4
DOCUCOLOR / developer for 700 series
« Last post by craman on May 10, 2018, 01:54:23 PM »
I have a bunch of 5000 developer but now we are getting into the newer color products I knew the xerox graphic area was the same as the 700 but the fusing was different didn't know if anyone has tried 5000 developer in a 700 the weight on the package is the same
5
Docutech and Docuprint / Main drive motors
« Last post by Darrell Starnes on May 10, 2018, 01:31:51 PM »
I have (22) 180 and (12) 135 main drive motors. Let me know if you need a spare.

100 dollars + shipping.
6
Docutech and Docuprint / EDN card cages
« Last post by Darrell Starnes on May 08, 2018, 08:46:18 AM »
I'm getting rid of about a dozen each edn card cages for both vld and Hene machines. Let me know if you want $100 each plus shipping, limited offer they're going to scrap
7
CANON IMAGEPRESS / Re: First post 03/16/09
« Last post by Milo Wilson on May 03, 2018, 12:28:00 PM »
It is a multiproblem machine!...lol  Just upgraded a customer from the canon 7000 to an iGen 150 and they are soooo happy now.
8
I have the 54 version and older for sparc and x86
9
FOR SALE / Re: PWS Laptop
« Last post by xtrain on May 03, 2018, 10:47:42 AM »
I found a really fast PWS laptop, Lenovo T420, Intel I 5 CPU. 6 GB. RAM, Windows 7, PWS 11.0. I can load any edoc, Diag, Snap you want. Priced at $700. email me at xtraininc@cableone.net for more info.
10
I have an earlier version of the Sparc software for the Nuvera.
51.70.33    538K27182

I'm looking for Nuvera X86  54.75.05.86

 You could email me at NetLinkDigital@hotmail.com
Pages: [1] 2 3 4 5 6 7 8 ... 10