DpsTeck

Recent Posts

Pages: [1] 2 3 4 5 6 7 8 ... 10
1
Docutech and Docuprint / 61xx Fault Code Reference Manual
« Last post by Bob_Bingham on April 21, 2018, 01:04:29 AM »
Ran into this on the net. Hope it helps someone.

http://www.teckbits.com/DT/content/FC_61XX.pdf
2
XEROX / Xerox 495 Continuous Feed Duplex Printer informations
« Last post by mmrazvan on April 20, 2018, 01:13:11 AM »
Hello,
I want to know more about Xerox 495 CF. I have a few questions:
1. Does the 495 CF can work without a print server?
2. How about printer licenses? I have read in the user manual that there are 2 licenses. By default, how much time are them available. It is hard to get a new license, maybe you have an approximate cost.
3. There are consumables still available or will be discontinued in a few years?
4. I have a FFPS that currently is not used anymore from an old Nuvera, can I use it with 495?

Thank you.
3
Docutech and Docuprint / Re: error 9-212
« Last post by Levi Brasil on April 18, 2018, 12:43:43 PM »
thanks to all who helped, I switched the cable from the P / R module and executed the dc951 settings successfully.
Now prints but with the negative images.

this machine was HeNe and I went to VLD, it has to reconfigure the NVM positions.
Which would be
4
LOOKING TO PURCHASE / Re: GSN pasword generator
« Last post by xtrain on April 11, 2018, 03:56:13 PM »
I now have the PWS Crack software to fix the GSN problem.
5
XEROX / Re: PWS TOOL FOR 58XX XEROX
« Last post by xtrain on April 11, 2018, 06:41:57 AM »
What kind of tool? EDOC, Diagnostic, Snap? I have all of these.
6
Freeflow and DocuSP area / Re: Xerox docucolor 252 with a FreeFlow problems
« Last post by smart-refill on April 10, 2018, 02:09:27 PM »
I solved.

a Xerox technician reinstalled the freeflow applications.
7
Docutech and Docuprint / Re: error 9-212
« Last post by exCSER on April 10, 2018, 12:35:24 PM »
I've seen the wiring on the P/R module to the DSS tywrapped so tightly to the module that the DSS didn't work. The ribbon cable to the P/R module can also be at fault. If you unplug it on both ends and reverse it and the DSS then works- replace it.
8
Docutech and Docuprint / Re: error 9-212
« Last post by Darrell Starnes on April 10, 2018, 11:28:45 AM »
IF the pr belt hazes over from improper cleaning or development , the dss will not get a clean reading and will fault with 09-212.
9
Xerox Nuvera / Re: Nuvera HFSIs
« Last post by craman on April 10, 2018, 11:10:27 AM »
not sure if this will help but this is inventory for an advance operator could have on hand
10
Docutech and Docuprint / Re: error 9-212
« Last post by Levi Brasil on April 10, 2018, 08:07:23 AM »
Docutech
Pages: [1] 2 3 4 5 6 7 8 ... 10