Symptom:
Not have any message on display, or when put monitor on, monitor just stay
off. Take out all card`s only left video board and no message on monitor,
dead. Like motherboard not powering at all.
-Replace motherboard - 140N05286, with new processor and BIOS chip base
version - 537N00124, have message on monitor but not on Fiery display.
-Replace ix uib pwb part#140N5279, got message on both.
-Start system reinstall with 2 CD. Pass both CD, but when start to
booting, or creating backup, or loading, just stop and not going at all.
Every time different. Try with other CD`s same.
-Few times write on monitor blue screen with message: Beginning Dump of
Physical Memory..
-replace HDD and start again all with BIOS restart..., again same. Install
system on HDD on other Fiery and put it in this, just loading...
-Order and replace memory: DIMM - 128MB; 140N05278. Now installation pass
only ones, but after reboot, again loading.., or beginning dump of
physical memory...
-Restart BIOS again and try to reload software again but same.
-Rotate place for card`s inside the Fiery. Finally sequence is firs video
board then on PCI 1st empty because of Fiery printer/copier board on 2nd,
and 3rd ix uib pwb and down is network card.
-Try all parts on old motherboard, but I just get one more dead ix uib
pwb, order new again, and replace.
Again same loading..., or blue screen and Beginning Dump of Physical
Memory..
Few time I got opened windows NT but with message press ctrl-alt-del to
log on, then At least one service or driver failed during system startup.
Use event to examine the event log for details.
Regards
